Linksys RE6350 WPS configurations

From this blog, you will learn about the steps that will help you in configuring the Linksys RE6350 WPS configuration. So, just have a look to all the steps that are discussed in this blog

Step 1: Just make sure that the device RE6350 is getting the power supply from 192.168.1 1 Linksys setup. Always try to place your router or your gateways close to each other. 

Step 2: Just hold or press the button of WPS that you can find out on your router or your gateway.

Step 3: On your device which is RE630, just press the button of WPS. After the pressing of the button you will see that the light on the front of your range extender will start blinking in the light green color.

Step 4: If you will see that the light is turned into the solid green color then this indicates that the connection has been successfully established. If not, then just wait for the connection to be established.

Step 5: Kindly note that if you are using the Linksys extender and you want to extend its 5 GHz network system then you need to repeat all the steps from step 2 to step 4.

After you have seen that the LED light is turned into the solid green color then you have successfully setup the configuration of your device which is RE650. If you want to check more settings or you want to manage all the settings, then you must need to visit to the web management page of the device.