setup Motion detection settings for Dlink DCS-8100LH

Due to the advancement in the technology there are many devices mainly which are cameras are equipped with the feature of the motion detection. So, if you are searching for the camera you may heard about the feature of the motion detection. One thing that strikes into your mind is that what is motion detection? In this blog, you will get all your doubts cleared regarding the feature of the motion detection in your rhttp dlinkrouter local.

What is motion Detection?

If you will use the feature of the motion detection, then you can easily monitor or check all those areas of your home or office which are highly unsecure. When the cameras which are having the feature of the motion detection will detect any irregular motion, then it will send you the notification.

Here are the steps for enabling the feature of the motion detection

Step 1: Move to the option of the wifi camera and choose the option for the main feature which is displaying on the top of the right corner of your r http dlinkrouter local.

Step 2: Click on the option of the settings which is displaying on the main feature option of the menu

Step 3: Click on the option of the motion detection

Step 4: Click on the check box for enabling the feature of the motion detection

Step 5: After this you will have the feature of the active area which means that you need to make the selection of those areas where you want to enable this feature.

Step 6: Click on the option for the camera that you want to detect for the motion. After this make the selection for the sensitive areas by moving your finger from the left to the right of the slider and check for the percentage that you want to select.